Wifi Menu (Optional); Bluetooth Menu (Optional); Installing A Software Option - Viavi SmartClass OLP-88 Operating Manual

4 B O
ASIC PERATION
W F ( )
I I MENU OPTIONAL
34
1. In the menu tap the
then tap [Factory Reset].
2. Tap [Yes] to proceed.
– or –
Tap [No] to cancel.

WiFi menu (optional)

In the menu tap the
J
Editable settings are displayed
– Enabled: switch WiFi on/off
– Mode: switch between Ad-Hoc / Access Point
Tap [Enabled] to switch WiFi on.
Information on enabled wifi connection is displayed
– SSID:
– IP Address
– Netmask
– MAC Address
– Port

Bluetooth menu (optional)

In the menu tap the
J
editable settings are displayed
– Enabled: switch Bluetooth on/off
Tap [Enabled] to switch Bluetooth on.
Information on enabled bluetooth connection is displayed
– SSID
– MAC Address
– PIN Code for connection establishment

Installing a software option

1. Connect an USB stick with the corresponding option file.
2. In the menu tap the [Software
[A]
3. Press the key.
4. Tap [Install from USB].
The license key is read in from the root directory of the USB stick.
The option(s) are installed.
[More] button,
[WiFi] button.
[Bluetooth] button.
Options] button.
OLP-88/OLP-88P