Servicing - Angelo Po 0G1CP1EC Use And Installation Manual

– Supply the appliance with water at 55°C.
– Drain the well completely after use.
– Always keep the appliance and the surrounding
areas clean.
RECOMMENDATIONS FOR SERVICING
Keep the appliance at peak efficiency by carrying
out the scheduled servicing procedures recom-
mended by the constructor. Proper servicing will al-
low the best performance, a longer working life and
constant maintenance of safety requirements.
Caution - warning
Before carrying out any servicing procedure,
activate all the safety devices provided and
decide whether staff at work and those in the
vicinity should be informed. In particular,
turn off the electricity supply using the
circuit- breaker and prevent access to all
devices which might people's health and
safety at risk if activated.
IT
Since the appliance is used for preparing foods for
human consumption, special care must be paid to
GB
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
DE
stantly be kept clean
FR
Important
Before starting
disconnect the electricity supply using the
ES
circuit-breaker and allow the appliance to
cool.
The precautions which follow are also important.
1 - Clean all parts of the appliance with warm wa-
ter, food-approved detergents and non-abra-
sive materials only.
2 - Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all sur-
rounding areas.
English

SERVICING

CLEANING INSTRUCTIONS
any cleaning procedure,
Caution - warning
Never use the appliance with no water in the
well, as this may damage its structure.
At the end of each session of use and whenever
necessary, clean:
– the well (see page 10);
– the accessories;
– the appliance and the surrounding environment
(see page 10).
Every 100 working hours have skilled, authorised
personnel carry out the following operations.
– Check that the safety thermostat is working cor-
rectly.
– check that the electrical system is in good work-
ing order.
3 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse surfaces with drinking water and dry.
5 - Pressurised water jets may only be used on ex-
ternal parts.
6 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
7 - Remove food residues immediately before they
set.
8 - Remove the limescale deposits which may form
on some of the appliance's surfaces.
- 10 -
5