Angelo Po 0G1CP1EC Use And Installation Manual page 26

FILLING AND EMPTYING THE WELL
Filling
The well can be filled in a number of different ways.
Quick no-limits filling.
– Press the knob (B) and turn it to setting 1 to fill the
well to the maximum level shown by the mark.
When the water reaches the maximum level, the
heating elements can be turned on and the different
top-up modes can be enabled.
Important
After filling, the knob (B) must be turned to
another position as otherwise water may
overflow from the well.
Quick automatic top-up.
– Turn the knob (B) to 2 to fill the well to the maxi-
mum level automatically when the water lev-
el drops below the minimum threshold.
Important
The maximum and minimum levels re-
fer to the operating range of the pres-
sure switch.
Slow automatic top-up.
– Turn the knob (B) to 3 for a slow, continuous flow
of water that keeps the water level inside the well
IT
constant.
GB
DE
Emptying
1 - Turn the knob (B) to 4 to shut off the water sup-
ply.
FR
2 - Turn on the tap (C) to empty the well.
ES
English
1
4
Important
If the water drops below the minimum level,
the "quick automatic top-up" mode is auto-
matically triggered.
C
- 8 -
B
2
3
IDM-39613601000.tif
IDM-39611700600.tif