Table of Contents
Advertisement
2
Safety chapter
2.1 Markings and warning symbols
Identification of safety notes
Warning signs denoting different types of
danger
2.2 Intended use
These operating instructions include notes and extracts from German reg‐
ulations relating to the operator's scope of responsibility. The notes and
quotes do not in any way release the operator from his/her responsibility
as operator. The notes and quotes are only intended to remind the oper‐
ator or make them aware of specific problem areas. The notes and quotes
do not in any way claim to be complete, nor applicable to every country
and every type of application, nor to being unconditionally up-to-date.
The following signal words are used in these operating instructions to
denote different severities of danger:
Signal word
WARNING
CAUTION
The following warning signs are used in these operating instructions to
denote different types of danger:
Warning signs
NOTICE!
Wear caused by "Pump ON/OFF" using the mains con‐
nection
Frequent switching of the pump on and off (>2 times
each day) using the supply voltage leads to increased
wear in the pump. The pump is not technically designed
for this.
If necessary, use the "Pause" function to switch the
pump to standby mode. Do not switch the pump on and
off using the supply voltage to spare a pause input.
Safety chapter
Meaning
Denotes a possibly dangerous sit‐
uation. If this is disregarded, you
are in a life-threatening situation
and this can result in serious inju‐
ries.
Denotes a possibly dangerous sit‐
uation. If this is disregarded, it
could result in slight or minor inju‐
ries or material damage.
Type of danger
Warning – high-voltage.
Warning – danger zone.
7
Advertisement
Table of Contents
