Micromeritics GEMINI VII 2390 Installation Instructions And Checklist page 88
Surface area analyzer
Hide thumbs
Also See for GEMINI VII 2390:
- Installation instructions and checklist (80 pages) ,
- Service manual (60 pages)
Table of Contents
Advertisement
8 21CFR11 Environments
10. When installation completes, the Installed window displays. Click Next.
11. The Analyzer Configuration window is used to configure the system for each analyzer and
serial number to be installed.
a. In the Step 1 group box:
If...
installing the analysis program dur-
ing initial installation
using the analysis program for off-
line data reduction
moving an analyzer from another
computer to this computer
b. In the Step 2 group box, enter the serial number for each analyzer to be attached to
this computer. The serial number label is located either near the incoming power
supply or near the ON/OFF switch.
c. Click Next.
8 - 10
Then...
select the number of analyzers to be
installed.
select 0.
select 0.
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
Advertisement
Table of Contents
Need help?
Do you have a question about the GEMINI VII 2390 and is the answer not in the manual?