Micromeritics GEMINI VII 2390 Installation Instructions And Checklist page 34

3 Keypad Only Installations
Communications Functions (continued)
Function
E-mail Address
E-mail Server
3 - 12
Description
When connected to a network via an Ethernet connection, analysis
results can be e-mailed automatically upon completion. Enter the
email address to receive these reports. A keyboard must be used to
complete this function. If not using DHCP and the e-mail address is
outside the local network, a gateway address must be specified.
Enter the e-mail address.
Enter the numerical address of the SMTP server (the computer that is
going to deliver the results).
Your IT Department may need to configure the server to accept e-mail
from the analyzer. For proper configuration, the following information
may be required:
IP address for the Gemini
n
Sender line: Micromeritics_2390
n
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021