Micromeritics GEMINI VII 2390 Installation Instructions And Checklist page 47
Surface area analyzer
Hide thumbs
Also See for GEMINI VII 2390:
- Installation instructions and checklist (80 pages) ,
- Service manual (60 pages)
Table of Contents
Advertisement
a. In the Step 1 group box:
If...
installing the analysis program dur-
ing initial installation
using the analysis program for off-
line data reduction
moving an analyzer from another
computer to this computer
b. In the Step 2 group box, enter the serial number for each analyzer to be
attached to this computer. The serial number label is located either near the
incoming power supply or near the ON/OFF switch.
c. Click Next.
10. On the Ethernet Ports window, select one option from the following table:
If...
the configured port is listed
the configured port is not listed
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
Then...
select the number of analyzers to be
installed.
select 0.
select 0.
Then...
select the port, then click Next.
click
Specify
and enter the remaining portion of the
IP Address, then click Next.
The IP Address must be 192.168.77.100.
4 Software Installation
4 - 5
Advertisement
Table of Contents
Need help?
Do you have a question about the GEMINI VII 2390 and is the answer not in the manual?
Questions and answers