Set the correction factor (e.g.KANTIP=2,5%)
Press the
time
Press
to set the
confirm with
YES
Press
to copy the set
other sensors and confirm with
To set again the default values to the selected
sensor, press
SAVE
to confirm the settings.
SMART MATRIX MTC
Position setting
key to increase the value of 1,0% a
KANTIP
default value and
KANTIP
value to all the
YES
and confirm with
YES
2 - 38
Need help?
Do you have a question about the SMART MATRIX MTC and is the answer not in the manual?