Connection To Final Focusing Unit - Unitek Miyachi LW250 Operation, Maintenance And Service Manual

Connection To Final Focusing Unit (continued)
990-605 REV B: May, 1997
Note: When cleaning the fiber optic cables, prior to
insertion into the focusing heads, always blow off
the connectors on the focusing heads.
CAUTION: Always use an air blower designed for
use on high quality optics, such as a photographic
air blower. Never use cleaners or air supplies with
silicones or oils.
LW250 PULSED Nd: YAG LASER
CHAPTER 5: GETTING STARTED
5-6