Unitek Miyachi LW250 Operation, Maintenance And Service Manual page 129

-F- (continued)
Fiber optic cable:
Minimum bend radius (1-2)
Power/energy specifications (1-2)
Precautions (1-1)
Filter replacement, cooling system (7-1)
Flash lamp replacement (8-1)
Flow rate controller replacement (7-8)
Focusing unit fiber connection (5-5)
Foreword, manual (iii)
Fuse replacement (8-13)
Getting started (5-1)
Hold down brackets, oscillator head (1-3)
Input focusing adjustment, Z-axis (5-5)
Input signals:
Contact (3-2)
Listing (3-1)
Specifications (3-3)
Transistor (3-3)
Installation site precautions (1-1)
Internal controls and indicators (2-5)
Ion exchange resin cartridge replacement
(7-2)
I/O signal interface (3-1)
990-605 REV B: May, 1997
-G-
-H-
-I-
LW250 PULSED N:d YAG LASER
ALPHABETICAL SUBJECT INDEX
Laser beam alignment (8-4)
Laser beam emission control (6-12)
Laser oscillator head (2-9)
Laser oscillator head fitting removal (5-1)
Laser output:
Capacitor bank switching (6-5)
High speed operation (6-6)
Multiweld schedules (6-8)
Laser safety officer duties (1-4)
Maintenance:
Cooler (7-1)
Maintenance screen (2-12)
Maintenance precautions (1-4)
Malfunction check list (8-13)
Minimum bend radius, fiber optic cables
(1-2)
Memory backup battery replacement (8-12)
Modification of laser precaution (1-4)
Monitor screen (2-14)
Operating instructions (6-1)
Operating precautions (1-4)
Operation area precautions (1-4)
Operation in cold weather (1-3)
Operation:
Precautions (6-13)
Preparation (6-1)
Optical fiber connection (5-3)
Optical fiber outlet precautions (6-13)
Optics cleaning (8-9)
-L-
-M-
-O-
INDEX-3