Output Signals On The Ext. I/O (2) Connector - Unitek Miyachi LW250 Operation, Maintenance And Service Manual

Output Signal Specifications, EXT I/O (2) Connector. Refer to Figure 3-6.The
output signal specifications are as follows:
Figure 3-6. Output Signals on the EXT. I/O (2) Connector

Pin No. 1 -- 2, Resonator Shutter Open: When the resonator shutter is open, this
circuit is closed.

Pin No. 3 -- 9 and 19 -- 21 , Shutters 1 through 6: When shutters 1 through 6 are
open, their associated circuits are closed.
990-605 REV B: May, 1997
LW250 PULSED Nd: YAG LASER
CHAPTER 3: I/O SIGNAL INTERFACE
L25DIODE.WPG
3-10