Pc Configuration; Installation Tasks; Install The Visualdsp++ Software; Table 2-1: Minimum Pc Configuration - Analog Devices ADSP-21161N EZ-KIT LITE Manual

The EZ-KIT Lite evaluation system contains ESD (electrostatic
discharge) sensitive devices.
accumulate on the human body and equipment and can
discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges.
precautions are recommended to avoid performance degradation
or loss of functionality. Store used EZ-KIT Lite boards in the
protective shipping package.

2.3 PC Configuration

For correct operation of the VisualDSP++ software and the EZ-KIT Lite, your
computer must have the minimum configuration shown in Table 2-1.

Table 2-1: Minimum PC Configuration

Windows 98, Windows 2000 or later
Intel (or comparable) 166MHz processor
VGA Monitor and color video card
2-button mouse
50MB free on hard drive
32 MB RAM
Full speed USB port
CD-ROM Drive
Note: This EZ-KIT Lite does not run under Windows 95 or Windows NT
2.4

Installation Tasks

The following tasks are provided for the safe and effective use of the ADSP-
21161N EZ-KIT Lite. Follow these instructions in the order presented to ensure
correct operation of your software and hardware.
1. Install VisualDSP++ software
2. Install VisualDSP++ license
3. Install EZ-KIT Lite debug software
4. Setup EZ-KIT Lite hardware
5. Install EZ-KIT Lite USB driver
6. Verify the USB driver installation
7. Start VisualDSP++

2.4.1 Install the VisualDSP++ Software

This EZ-KIT Lite comes with the latest version of VisualDSP++ for the SHARC
DSP family. You must install this software before installing the EZ-KIT Lite
debug software.
ADSP-21161N EZ-KIT Lite Evaluation System Manual
Electrostatic charges readily
Proper ESD
2-2