Time Schedule - Beretta EXCLUSIVE C Series Installer And User Manual

- ZONE 2 DELIVERY
- FLUE GAS PROBE OP. HOURS
- MAIN ZONE SET-POINT
- ZONE 1 SET-POINT
- ZONE 2 SET-POINT
- SYSTEM PRESSURE.
The "ok" key is inactive.
The "back" key allows you to return to the initial screen.
In the absence of additional zones or if the screed heater function is not
operating, the relative information will not be displayed.
12 MENU
Using the MENU it is possible to access the configuration of the SETTINGS
and the TIME SCHEDULE (available only if the timer is enabled (POR=1).
To do this, it is necessary to highlight the desired entry using the "up" and
"down" keys and then pressing "ok" to confirm the selection. Pressing
"back" takes you back to the initial screen without making any selection.

TIME SCHEDULE

SELECT OPTION
12.1 Settings
Select this function to modify the following settings:
- TIME & DATE
- LANGUAGE
- BACKLIGHT.
To access the desired setting, it is necessary to highlight it using the "up"
and "down" keys and then pressing "ok" to confirm the selection.
Press "back" to return to the start screen without making any selection.
SELECT OPTION
12.1.1 Time & date
Press "ok" to highlight in sequence HOURS, MINUTES, DAY, MONTH,
YEAR and press the "up" and "down" keys to change the desired values.
Once the sequence has finished by pressing "ok", the settings will be
saved and the display will return to the initial screen.
By pressing "back" at any time the system will return to the
cancelling the changes that were made.
ENTER TIME AND DATE
12
18 / 11 / 2013
USE THE ARROWS TO MODIFY
USE THE ARROWS TO MODIFY
12.1.2 Language
Press the "up" and "down" keys to select the desired language.
Pressing "ok" the language selection is confirmed and the display returns
to the initial screen.
Pressing "back" the system returns to the
changing the system's language.
12.1.3 Backlight
The screen saver display (backlight off) is automatically activated when the
time, that has been set in parameter \ MENU \ SETTINGS \ BACKLIGHT,
elapsed without having pressed any buttons.
In the screen saver the current time is normally displayed.
When there is a heat request, the current time is replaced with the boiler
flow temperature and turns on the icon concerning the type of request in
progress.
MENU
MENU
SETTINGS
SETTINGS
TIME SCHEDULE
SELECT OPTION
SETTINGS
SETTINGS
TIME & DATE TIME & DATE
LANGUAGE
LANGUAGE
BACKLIGHT
BACKLIGHT
SELECT OPTION
TIME & DATE
TIME & DATE
ENTER TIME AND DATE
: 17
screen without
SETTINGS
A message for the system efficiency level can be displayed in the top of
the screen:
- HIGH EFFICIENCY (if the average value of the return probe > 55°C)
- OPTIMAL EFFICIENCY (if 25°C < average value of the return probe <
55°C).
05:11
12.1.4 Time schedule
Selecting this function, only if the time schedule is enabled (POR=1), it is
possible to change the following:
- MAIN
- ZONE 1
- ZONE 2.
To access the desired timer programme , it is necessary to highlight it using
the "up" and "down" keys and then pressing "ok" to confirm the selection.
Press "back" to return to the start screen without making any selection.
For a detailed description of the scheduled programming timer, please refer
to the section "13 TIME SCHEDULE" .
13 TIME SCHEDULE
Select the desired day using the "up" and "down" keys.
A table will be displayed indicating the day and the time frames already
present. Press "ok" to access the programming for the selected day. Pressing
"back" takes you back to the initial screen without making any selection.
SETTINGS
Once the selection has been made, the user can choose from among the
following options:
- ADD
- MODIFY
- DELETE
- COPY.
13.1 Add
This function serves to add a new time frame to the selected day.
Press "ok" to select the function, after having highlighted it (if necessary)
using the "up" and "down" keys.
Press the "up" and "down" keys to increase or decrease by 30 minutes
time and press "ok" to confirm the selection.
the start
OPTIMAL EFFICIENCY
OPTIMAL EFFICIENCY OPTIMUM EFFICIENCY
MON
MON
SCHEDULE
SCHEDULE
18/11/2013 12:17
MAIN
MAIN
ZONE 1
ZONE 1
ZONE 2
ZONE 2
SELECT THE ZONE
MAIN
MAIN
START END
START END
07:30 08:30
SELECT
SELECTA DAY
A DAY
11:30 13:30
18:00 22:30
THURSDAY
THURSDAY
ZONE SCHEDULE
ZONE SCHEDULE
MAIN
MAIN
START END
START END
THURSDAY
THURSDAY
07:30 08:30
11:30 13:30
ADD
ADD
18:00 22:30
MODIFY
MODIFY
DELETE
DELETE
COPY
COPY
SELECT OPTION
SELECT OPTION
ENGLISH
42
°C
P
31