Table of Contents
Advertisement
Available languages
Available languages
12.1 Settings
Select this function to modify the following settings:
- TIME & DATE
- LANGUAGE
- BACKLIGHT.
To access the desired setting, it is necessary to highlight it using the "up"
and "down" keys and then pressing "ok" to confirm the selection.
Press "back" to return to the start screen without making any selection.
SELECT OPTION
12.1.1 Time & date
Press "ok" to highlight in sequence HOURS, MINUTES, DAY, MONTH,
YEAR and press the "up" and "down" keys to change the desired values.
Once the sequence has finished by pressing "ok", the settings will be
saved and the display will return to the initial screen.
By pressing "back" at any time the system will return to the
cancelling the changes that were made.
ENTER TIME AND DATE
ENTER TIME AND DATE
12
18 / 11 / 2013
USE THE ARROWS TO MODIFY
USE THE ARROWS TO MODIFY
12.1.2 Language
Press the "up" and "down" keys to select the desired language.
Pressing "ok" the language selection is confirmed and the display returns
to the initial screen.
Pressing "back" the system returns to the
changing the system's language.
12.1.3 Backlight
The screen saver display (backlight off) is automatically activated when the
time, that has been set in parameter \ MENU \
elapsed without having pressed any buttons.
In the screen saver the current time is normally displayed.
When there is a heat request, the current time is replaced with the boiler
flow temperature and turns on the icon concerning the type of request in
progress. A message for the system efficiency level can be displayed in the
top of the screen:
- HIGH EFFICIENCY (if the average value of the return probe > 55°C)
- OPTIMAL EFFICIENCY (if 25°C < average value of the return probe <
.
55°C)
05:11
12.1.4 Time schedule
Selecting this function, only if the time schedule is enabled (POR=1), it is
possible to change the following:
- MAIN
- ZONE 1
- ZONE 2
- DHW (only if a water tank is connected).
To access the desired timer programme, it is necessary to highlight it using
the "up" and "down" keys and then pressing "ok" to confirm the selection.
Press "back" to return to the start screen without making any selection.
For a detailed description of the scheduled programming timer, please refer
to the section "13 TIME SCHEDULE" .
SETTINGS
SETTINGS
TIME & DATE
TIME & DATE
LANGUAGE
LANGUAGE
BACKLIGHT
BACKLIGHT
SELECT OPTION
TIME & DATE
TIME & DATE
:
17
SETTINGS
screen without
\ BACKLIGHT,
SETTINGS
OPTIMAL EFFICIENCY
OPTIMAL EFFICIENCY
OPTIMUM EFFICIENCY
42
°C
NOTE:
- MAIN, ZONE 1 or ZONE 2 parameters are available if the programming
timing of the affected area is active
- DHW parameter is available only if a water tank has been added to the
boiler
13 TIME SCHEDULE
Select the desired day using the "up" and "down" keys.
A table will be displayed indicating the day and the time frames already
present. Press "ok" to access the programming for the selected day.
Pressing "back" takes you back to the initial screen without making any
selection.
SETTINGS
Once the selection has been made, the user can choose from among the
following options:
- ADD - MODIFY - DELETE - COPY.
13.1 Add
This function serves to add a new time frame to the selected day.
Press "ok" to select the function, after having highlighted it (if necessary)
using the "up" and "down" keys.
Press the "up" and "down" keys to increase or decrease by 30 minutes
the
time and press "ok" to confirm the selection.
start
P
Press the "up" and "down" keys to increase or decrease by 30 minutes
the
end
time and press "ok" to confirm the selection.
MON
MON
SCHEDULE
SCHEDULE
18/11/2013
12:17
MAIN
MAIN
ZONE 1
ZONE 1
ZONE 2
ZONE 2
ZONE 2
DHW
DHW
SELECT THE ZONE
MAIN
MAIN
START
END
START
END
07:30
08:30
SELECT
SELECTA DAY
A DAY
11:30
13:30
18:00
22:30
THURSDAY
THURSDAY
ZONE SCHEDULE
ZONE SCHEDULE
MAIN
MAIN
START
END
START
END
THURSDAY
THURSDAY
07:30
08:30
11:30
13:30
ADD
ADD
18:00
22:30
MODIFY
MODIFY
DELETE
DELETE
COPY
COPY
SELECT OPTION
SELECT OPTION
MAIN
MAIN
START
END
START
END
THURSDAY
THURSDAY
07:30
08:30
ADD
ADD
11:30
13:30
PERIOD
PERIOD
18:00
22:30
ENTER
ENTER
START TIME
START TIME
14:00
USE THE ARROWS TO MODIFY
USE THE ARROWS TO MODIFY
MAIN
MAIN
START
END
START
END
THURSDAY
THURSDAY
07:30
08:30
ADD
ADD
11:30
13:30
PERIOD
PERIOD
18:00
22:30
ENTER
ENTER
END TIME
END TIME
15:00
14:00
USE THE ARROWS TO MODIFY
USE THE ARROWS TO MODIFY
ENGLISH
31
Advertisement
Table of Contents
