Product Description - Interacoustics Sera Instructions For Use Manual

Product description

The Sera is a multifunctional handheld screening device that can perform and record the following test
TM
types depending on the licenses installed:
• Distortion Product Otoacoustic Emissions (DPOAE)
Transient Evoked Otoacoustic Emissions (TEOAE)
•
Automated Auditory Brainstem Responses (ABRIS)
•
Available configurations are:
Sera with ABRIS
• TM
• Sera with ABRIS and Transient Evoked Otoacoustic Emissions (TEOAE)
TM
Sera with ABRIS and Distortion Product Otoacoustic Emissions (DPOAE)
• TM
• Sera with ABRIS, Transient Evoked Otoacoustic Emissions (TEOAE) and Distortion Product
TM
Otoacoustic Emissions (DPOAE)
License configurations can be added even after the device has been purchased and taken into use. Refer to
section 3.14 Licenses for more information.
The Sera operates with different transducers and cable configurations. The table below shows which
TM
transducers and cable configurations are possible for use with the Sera
TRANSDUCER / CABLE CONFIGURATION
SnapPROBE TM
directly connected to Sera
OWA Probe directly connected to Sera
SnapPROBE and OWA Probe directly
TM
connected to Preamplifier cable
IP30 directly connected to Preamplifier cable
The system consists of the following included and optional parts:
Standard Components, General
Sera handheld device
TM
Sera cradle
TM
Cradle power supply
Preamplifier
1
USB Type A-B Micro cable
Carrying case
Infant ear simulator
Pinch clip cables for snap electrodes
Instructions for Use
HearSIM software bundle
TM
Sera Probe Tip Kit
TM
Sera ADI Screening Eartip Kit
TM
Sera Probe Cleaning Kit
TM
IP/Probe Accessory Kit
EarCup Accessory Kit
Stylus Pen
1 Applied part according to IEC 60601-1
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
TM
TM
1
1
1
.
TM
DPOAE TEOAE
Yes Yes
Yes Yes
Yes Yes
No No
Configurations
ABRIS
•
•
•
•
•
•
n/a
•
•
•
Optional
•
•
•
Optional
•
ABRIS
No
No
Yes
Yes
ABRIS + OAE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional
•
Page 2