Installing The Hm-E200 Label Printer (Optional) - Interacoustics Sera Instructions For Use Manual

Installing the HM-E200 label printer (optional)

The connection of the Sera
recommended printer from Interacoustics.
NOTICE: Only printers purchased through Interacoustics distributors or Sanibel Supply® are compatible with
the Sera .
TM
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
and the HM-E200 label printer is made via wireless pairing. Only use the
TM
Place the cradle upright on your desk. There are two
insertion guides to place the instrument properly into
the cradle.
Place the Sera into the cradle so that it sits within
TM
the U-shaped placement guides. Proper placement
in the cradle is needed to ensure charging of the
battery.
Grasp the upper portion of the Sera
cradle placement guides and lift it out of the cradle.
above the
TM
Page 12