Patient Id Conflict - Interacoustics Sera Instructions For Use Manual

When you have completed entry of data, you can proceed immediately to test the patient or press the 'quick
add' button .

4.5.6 Patient ID conflict

D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
It is possible to configure the device to input an automatic ID number into
this field so that you do not have to enter an ID. The format of the
automatic ID will include the device serial number followed by the year and
month in YYMM format and a sequential number from 1 to 65550. This ID
can be overwritten when entering the patient data.
Configuring Sera to use an automatically entered ID number is
TM
accomplished via HearSIM
The Patient ID must be unique. If you attempt to enter a duplicate patient
ID into the database, an ID conflict message will display. After dismissing
the message by selecting the Checkmark in the bottom control bar,
change the ID to a different unique number.
.
TM
Page 29