Printer Offline - Interacoustics Sera Instructions For Use Manual

Please note: Do not power off the Sera
It is possible to share one printer with multiple Sera
the printer at a time. This means that only one Sera
must be powered off after use with one Sera
If you want to print measured results on the connected printer, it is recommended to switch on the printer
before doing the measurements. This will allow the printer enough time to connect and be ready for printing
when measurements are completed.

3.4.5 Printer offline

D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
during printing.
TM
to then successfully connect to the other Sera
TM
An attempt to print when the wireless printer is powered off or is out of range to
the Sera will result in the appearance of an error message.
TM
Dismiss the message by selecting the check button in the bottom control bar.
Try again after turning on the printer or moving into range.
devices. However, only one device can be paired with
TM
can be turned on in range of the printer and the printer
TM
device.
TM
Page 14