Oae Measurement Screen - Interacoustics Sera Instructions For Use Manual

4.8.3

OAE measurement screen

During the OAE measurement, a bar graph for each of the frequencies in the test protocol reflects the
progress toward a pass (Table 11). The bar will fill up completely in color and a checkmark will appear above
the bar when the criteria for a pass is achieved at the specific frequency.
Additionally, horizontal bars for probe stability, noise and test progress appear. When noise and probe
stability are acceptable, a checkmark appears next to the horizontal bar.
Table 11: DPOAE measurement screen.
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
Screen area/graphic Function name
Test status
information.
Patient information.
Test progress bars.
Noise bar with
checkmark if noise is
acceptable.
Time bar.
Stop button.
Pause/continue
screening button.
Description
Indicates device is in
testing mode.
Displays the selected
patient name.
Provides feedback
about the test progress
for reaching a Pass
result.
Indicates acceptable
noise rejection level
and status.
Elapsed test time.
Stops the test; assigns
an Incomplete result.
Pause/Continue the
measurement.
Page 44