Home Screen; Adding A New Patient - Interacoustics Sera Instructions For Use Manual

4.5.4 Home screen

4.5.5 Adding a new patient

D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
Usually, the Sera starts on the Home screen. The Home Screen
TM
displays the buttons controlling entry into the major functions of the
Sera .
TM
The following information can be viewed on the screen:
Select New Patient to enter demographics for a new patient. After
•
entry of the patient's information you can save the name to the
database for testing later or immediately proceed with the testing.
Select Patient to review the list of patients saved on the device.
•
Select a patient to review detailed demographic and test
information for this patient or to begin a test.
Select Quick Test to proceed immediately to perform a test
•
without entry of patient information. Quick tests are saved
temporarily under the patient name of Quick Test. If you want to
save a Quick Test session to a specific patient after testing, you
can save it by editing the Patient Information.
The Change User control will be unavailable for selection if user
•
login is disabled. Select Change User to log out of the current
user and display the User list for selection of a new user.
Select Setup to access a list of the device settings that can be
•
changed directly on Sera
using HearSIM
Patient information can be entered manually into the Sera
Patient screen. Select the New Patient button on the Home screen.
In the New Patient screen, select a field for data entry by touching the
desired field. The appropriate data entry control such as the keyboard,
calendar or drop-down list will open. Enter the patient's data for the
desired fields:
• Patient ID (mandatory field)
Last name
•
First name
•
Tima and Date of birth
•
• Gender
Risk factors
•
Other risk factor
•
Additional patient data fields can be added through the HearSIM
software:
Screening consent
•
Tracking consent
•
Ethnicity
•
Select and enter data until all desired fields are completed.
The Patient ID field must be completed in order to save the data or
proceed to a test.
. Some settings can only be changed
TM
.
TM
via the New
TM
TM
Page 28