Quick Test; General; Saving A Quick Test - Interacoustics Sera Instructions For Use Manual

Quick test

4.9.1 General

The process of a Quick Test is identical to that of a standard test.
Quick tests can be printed immediately after the test is completed, but no identifying information will appear
on the print-out.
Only the last Quick Test session is saved temporarily in the Sera
button is selected on the Home screen. When Quick Test is selected, the previous Quick Test session is
immediately and permanently deleted from Sera
Please note: Quick test functionality can be enabled/disabled by an Administrator via HearSIM
Test is disabled on your device, then the Quick Test button will not appear on the Home screen.

4.9.2 Saving a quick test

If it is your standard practice to save screening tests, it is highly recommended that you first enter the patient
information or select an existing patient in the database before performing the screening.
However, if you want to save a Quick Test session (all tests) immediately after it was performed, follow these
steps:
1. At the Home screen, choose Select Patient
2. Select the "Quick Test" patient
3. Edit the patient's data in the Patient Information screen
4. Select the Checkmark in the bottom control bar
The Quick Test session is now saved under the patient ID and name you entered.
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
Selection of Quick Test from the Home screen bypasses entry of patient
information or selection of a patient from the database.
TM
until the next time that the Quick Test
TM
.
. If Quick
TM
Page 50