Select Test Type; Test-Related Field Entry - Interacoustics Sera Instructions For Use Manual

The following processes are the same regardless of the type of testing (Automated ABR or OAE) you
perform.
Selection of the Test button
device, some screens may appear before the actual test screen is displayed.

4.6.6 Select test type

4.6.7 Test-related field entry

D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
starts the process toward testing. Depending on the configuration of your
If your device has both Automated ABR and OAE functionality or more
than one protocol of the same test type exists on the device, then a Select
Test screen may appear for you to select which test you wish to perform.
Underneath the test type (e.g., TEOAE), the name of the protocol is listed.
Displayed tests are also dependent on the connected transducer. For
example, if only the probe is connected to Sera
tests will not show in the list. The preamplifier must be connected with an
appropriate transducer to see Automated ABR tests.
Please refer to the Sera
information about the protocols.
Your Sera can be configured via HearSIM
TM
each test regarding:
Screening facility name
•
Hospital status
•
• Name of the screener
Screening stage
•
• Reason not screened
When this function is enabled, a Test field entry screen will appear so you
can complete these fields correctly for the current patient. Since these
fields are often the same from patient to patient, your selection will be
recalled so that you only need to confirm the entry by proceeding with
selection of the Test button if the current items displayed in the fields are
correct.
If you have logged into the device upon boot up, then your name will also
be saved with the test and the Test field entry screen displays your name
in read-only format.
, then Automated ABR
TM
Additional Information for further
TM
to save information with
TM
Page 33