Cleaning The Snapprobe; Accessories/Replacement Parts - Interacoustics Sera Instructions For Use Manual

Cleaning the SnapPROBE

The ear tips for the SnapPROBE
the probe and an infant ear canal. The elongated shape will typically collect most of the ear wax, which is
disposed along with the ear tip after use, thereby limiting how often the filters in the probe need to be
replaced. It is important that the probe tip is clean and free of wax or other debris before conducting a test.
Wax or debris in the probe tip can cause incorrect presentation of the stimulus or recording. A visual
inspection of the probe and its filters should therefore be made prior to every measurement.
If any traces of ear wax, debris or the like are present, the filters of the probe need to be replaced.

Accessories/replacement parts

Some reusable components are subject to wear with use over time. We recommend that you keep these
replacement parts available (as appropriate for your Sera
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
TM
are designed to maintain distance between the sensitive components of
TM
Remove the ear tip from the probe in order to access the SnapPROBE
three filters.
The filters can be removed using a replacement filter tool from the
replacement filter kit.
Use the empty slot of the replacement filter kit to remove a filter from the
probe.
I
nsert the new filter provided on the tool in the empty filter slot. Dispose of
the old filter immediately to avoid mixing it up with new replacement filters.
device configuration).
TM
's
TM
Page 67