Selecting From The Patient List - Interacoustics Sera Instructions For Use Manual

4.5.7 Selecting from the patient list

A patient can be selected from the Patient list. Select the Select Patient button on the Home screen.
After selecting the patient, you can proceed to:
Review the patient's test history
•
Test the patient
•
In the Select Patient list, a square is present on the right-hand side of the patient's name/ID. The appearance
of the square reflects the test status (Table 3).
Table 3: Test Status of patient.
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
You can find the desired patient in the list in several ways:
Use the Search button to open a screen in which you can enter all
•
or part of the patient's ID, last or first name to search for matching
patients. The patient list will be shortened to include only matching
entries
Page down or up using the arrow keys to find the desired patient
•
name
• Select the patient of interest to open the Patient information
screen
No tests are saved in the device for this patient.
Tests are saved in the device (between 1 and 49 tests).
The maximum number of tests are saved (50). No additional tests can be
performed for this patient.
Page 30