Sound; Printer - Interacoustics Sera Instructions For Use Manual

4.13.3 Sound

4.13.4 Printer

D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
Set up your preferences for the presentation of a sound as
feedback under various conditions. The volume level can also be
set here. Conditions for which you can choose to present a sound
are:
Touch sound – a sound is presented for all button presses
•
on the device
Test end sound – a sound is presented when a test is
•
completed
Warning sound – a warning sound is presented when an
•
electrode becomes detached during Automated ABR
testing or when the battery charge is low
Select the Checkmark button in the control bar to confirm the
settings and close the Sound Setup screen.
To pair to the optional HM-E200 wireless printer, select the Search
button in the control bar. Be sure that the printer is powered on. The
name "HM-E200" will display when the printer is successfully paired
to the Sera .
TM
Select the Checkmark button in the control bar to confirm the
settings and close the Printer Setup screen.
Page 57