Time Bar; Test Done Screen - Interacoustics Sera Instructions For Use Manual

Time bar

During testing, the Time or progress bar will fill up, as good samples of data are obtained. When 180
seconds (3 minutes) of acceptable EEG samples have been acquired, the bar will be completely filled, and
the test will terminate automatically.

Test done screen

At the conclusion of a test, the result of the most recently completed test will continue to be visible (Table 7).
The ear selection control becomes active again so that the user can select the other ear for testing or can
repeat a test measure on the same ear.
The ear selection control can also be used to toggle between the last Automated ABR test performed on the
right and left ear during the session.
Table 7: Automated ABR Test done screen.
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
Displayed graphic Function name
Test status information.
Patient information.
Ear selection button.
Test result bars, result
symbols and additional
test information.
Start button.
Show test list button.
Description
Indicates test is done.
Displays the selected
patient name.
Toggle to select test
ear.
Provides feedback
about the result(s) of
the most recent test
performed per ear.
Begins an impedance
check for a new test.
Opens up list of all
tests performed in this
session.
Printing available if
printer is setup.
Page 39