Use Of The Ip30 Transducer With Ear Tips Or Earcups (Abris Only); Connecting To The Optional Pass-Checker - Interacoustics Sera Instructions For Use Manual

Use of the IP30 transducer with ear tips or EarCups (ABRIS only)

There are two versions of the IP30 transducer for use with the ABRIS module.
IP30 stereo ID earphone
The IP30 stereo ID earphones are for use with ear
tips via an adaptor. The transducer is labeled
"Calibrated for use with inserts".
Even though the transducers appear to be the same, ensure that you are using the transducer with the
disposable (ear tips or EarCups) it is calibrated for. Misuse may lead to incorrect results due to differences in
the calibration.

Connecting to the optional pass-checker

The ABRIS pass-checker can be used for assessing the integrity of the hardware, electrode leads and
transducer.
IP30 Stereo ID earphone – place a blue flanged ear tip onto the end of the ear tip adaptor and insert into
the holes of the pass-checker.
IP30 stereo ID EarCups – insert the black EarCup adapters directly into the holes of the pass-checker.
(The Pass-Checker is not required for patient testing.)
D-0113323-F – 2020/11
Sera™ - Instructions for Use - US
IP30 stereo ID EarCups
The IP30 stereo ID EarCups transducer is for use
with disposable EarCups via an adaptor. The
transducer is labeled "Calibrated for use with
EarCups".
Page 17