Beechcraft Musketeer Sport III A23-19 Pilot Operating Handbook page 178

Section VIII
BEECHCRAFT Sport III
Musketeer A23-19, 19A
Handling, Serv- Maint
When washing the airplane with mi Id soap and
water, use special care to avoid washing away
grease from any lubricated area . After washing
with solvent in the wheel well areas, lubricate
all lubrication points. Premature wear of lubri-
cated surfaces may result if the above precau-
tions are not taken.
Prior to cleaning , cover the wheels, making certain the
brake discs are covered . Attach the pitot cover securely,
and plug or mask off all other openings . Be particularly
careful to mask off both static air buttons before washing
or waxing.
Flush loose dirt away with clean water . then wash with a
mild soap and water . Avoid harsh, abrasive, or alkaline
soaps or detergents which could cause corrosion or
scratches. To remove stubborn oil and grease, use a cloth
dampened with aliphatic naphtha (see Consumable
Materials). After being cleaned with naphtha, the surface
should be re-waxed and polished . To prevent scratches,
use soft cleaning cloths or a chamcis when cleaning and
polishing . Any good grade ot automotive wax or polish can
be used on painted surfaces .
WINDSHIELD AND WINDOWS
The windshield and plastic windows should be kept clean
and waxed at all times . To prevent scratches, wash the
windows carefullywith plenty of soap and water, using the
palm of the hand to feel and dislodge dirt and mud . A soft
cloth, chamcis or sponge may be used, but only to carry
water to the surface. Rinse thoroughly, then dry with a
clean, moist chamois . Rubbing the surface of the plastic
with a dry cloth builds up an electrostatic charge which
attracts dust particles in the air.
8-20
October 1979