Brakes - Beechcraft Musketeer Sport III A23-19 Pilot Operating Handbook

Section VIII
Handling, Serv- Maint
BRAK ES
MB-1 thru MB-264
BEECHCRAFT Sport III
Musketeer A23-19, 19A
The brake hydraulic fluid reservoir, an integral part of the
master cylinders is located on the forward side of the
rudder pedals . Refer to Consumable Materials in th is sec -
tion for hydraulic fluid specification .
MB-265 thru MB -460
The brake hydraulic fluid reservoir is located on the tire -
wali in the engine compartment . Refer to Consumable Ma -
terials in this section for hydraulic fluid specification .
Since the pistons move to compensate for Iining wear, the
brakes require no adjustment. Complete information on
brake, wheel , and tire maintenance is contained in the ap -
propriate manual included in the loose tools and acces -
sories ki t.
INDUCTION AIR FILTER
This filte r should be inspected for foreign matter at least
once during each 50- hour operating period. In adverse
climatic conditions, or if the airplane is stored , preflight
inspection is recommended.
To remove and clean the filter :
1. Remave the filter retaining wing nuts and cover .
2. Remave the filter .
3. Clean and service as described in the manufacturer's
instructions on the filter .
4. Reinstall the filter .
5. Reinstall the cover and retaining wing nuts. Tighten
nuts to assure that the filter is secure and then
resafety.
8-16
October 1979