Ce Marking; Product Approval; Hydraulic Oil; Guarantee - Zepro ZHD 2500-130 Installation Instructions Manual

Introduction
1.2

CE marking

ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not
permitted. Welding is not permitted.
1.3

Product approval

Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.4

Hydraulic oil

If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted to
be filled with the oil specified on the label.
1.5

Guarantee

After installation, testing and verification, the tail lift's delivery card must be registered for the guarantee to be valid.
6
ZHD 2500-130/150
www.zepro.com