Identification Plate; Work Area; Warning Tape - Zepro ZHD 2500-130 Installation Instructions Manual

Marking
12.2

Identification plate

The identification plate is fixed on to the tail lift's frame.
Affix the corresponding sticker version of the identifica-
tion plate, preferably by the cab door post to facilitate
identification.
The identification plate contains the following informa-
tion:
• Type of lift
• Max. permitted load in kg
• Production number
• Year of manufacture
• Address and tel. no. of manufacturer
• Country of manufacture
• Type number for approved underrun protection
(RUPD)
• Type number for electromagnetic compatibility (EMC)
12.3

Work area

Affix the sticker clearly visible on the rear of the vehicle.
12.4

Warning tape

Affixed along the platform edge strips to mark the plat-
form edges in its lowered position. The location of the
warning tape often coincides with the contour marking,
in which case the warning tape can be omitted.
56
ZHD 2500-130/150
Image 58. Identification plate
Image 59. Work area
Image 60. Warning tape
www.zepro.com