Identification; Ce Marking; Product Approval; Hydraulic Oil - Zepro ZHZ 500 Installation Instruction

Important information
1.7

Identification

Identification list
Max. lifting capacity x 1 (kg)
Max. lifting height -850 = 850 mm
Cylinder model,
1.3

CE marking

ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not
permitted. Welding is not permitted.
1.4

Product approval

Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.5

Hydraulic oil

If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted to
be filled with the oil specified on the label.
1.6

Guarantee

After installation, testing and verification, the tail lift's delivery card must be registered for the guarantee to be valid.
6
E.g.
MA = Double-acting adjustable tilt
Single-acting lift
- 600 - 850 MA
_ _ _ - _ _ _ - _ _ _ _ _
ZHZ 500/600-850
www.zepro.com