Zepro ZHD 2500-130 Installation Instructions Manual page 24

Installation
• Horizontal distance from the outer edge of the beam
to the outside of the wheel: Max. 100 mm. See
figure 28.
• The lateral distance between the underrun
protection and the moving parts of the tail lift
must not exceed 25 mm. See figure 29.
• Each of the individual parts of the underrun
protection must have a surface area of at least
350 cm . See illustration.
2
24
0-100 mm.
Min. area: 350 cm
2
Image 29. Statutory dimensions
Max. 25 mm
Image 30. Statutory dimensions
ZHD 2500-130/150
Max. 25 mm
www.zepro.com