Table of Contents
Advertisement
Introduction
1.2
CE
marking
ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not
permitted. Welding is not permitted.
1.3
Product
approval
Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.4
Hydraulic
If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted
to be filled with the oil specified on the label.
1.5
Guarantee
After installation, testing and verification, the tail lift's delivery card must be registered for the guarantee to be
valid.
6
oil
Z 10/15/20
www.zepro.com
Hide quick links:
Advertisement
Table of Contents
