Siemens SITRANS LR250 Operating Instructions Manual page 53

Step 3 – Vessel Shape
Click on Step 3 - Vessel Shape in the navigation window. Select the vessel shape. To
describe a more complex shape, select Linearization Table in the Vessel Shape field and
Linearization (LTB) on page 53
see
go to Step 4.
Step 4 – Ranges
Click on Step 4 - Ranges in the navigation window. On the tab Step 4 of 5 Ranges: set the
parameters, and click on Apply to save settings. If necessary, click on the Breakpoints
tab, set the parameters, and click on Apply to save settings. Go to Step 5.
7ML19985KL01
for more details. Click on Apply to save settings then
SITRANS LR250 (FF) – OPERATING INSTRUCTIONS Page 47