Configure/Setup (Resource Block - Resource); Identification (Resource) - Siemens SITRANS LR250 Operating Instructions Manual

Configure/Setup (Resource Block - RESOURCE)

Note: For more detailed explanations of the parameters listed below see the pages
referenced.

Identification (RESOURCE)

Navigate to Configure/Setup > RESOURCE > Identification for access to:
Identification
• TAG
Read only. Description for the associated block: device tag prefixed by
block type.
• Descriptor (see
• Message (see
• Date (Installation Date)
The user entered date on which the device was installed in the system.
• Strategy
Used to identify grouping of blocks.
• Plant Unit
The identification number of the plant unit. For example, can be used in the
host for sorting alarms.
(read only)
Device
• Manufacturer (see
• Product Name
The manufacturer's product name for this device.
• Order Number
The manufacturer's order number (MLFB) for this device.
• Serial Number
The manufacturer's unique serial number for this device.
• Hardware Revision (see
• Firmware Revision (see
• Loader Revision (see
• EDD Version
The version of the EDD currently installed.
• Date of Manufacturing (see
Page 66 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS
2.1.2. Descriptor
on page 97)
2. 1 .3. Message
on page 97)
5.3. Manufacturer
2.2. 1 . Hardware Revision
2.2.2. Firmware Revision
2.2.3. Loader Revision
Manufacture Date on page 127
on page 128)
on page 97)
on page 97)
on page 97)
)
7ML19985KL01