Configure/Setup (Liquid Crystal Display Block-Lcd); Identification (Lcd); Operation (Lcd) - Siemens SITRANS LR250 Operating Instructions Manual

Configure/Setup (Liquid Crystal Display Block-
LCD)

Identification (LCD)

Navigate to Configure/Setup > LCD > Identification.
Identification:
• TAG
• Descriptor
• Transducer Block Type
• Strategy
• Plant Unit
Note: For descriptions of Identification parameters see

Operation (LCD)

Note: For more detailed explanations of the parameters listed below see the pages
referenced.
Navigate to Configure/Setup > LCD > Operation.
Click on Block Modes to open the dialog window for access to:
Block Modes:
• Actual Mode
• Target Mode
• Permitted Mode
• Normal Mode
Note: For descriptions of Block Modes see
7ML19985KL01 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS
Identification: on page 49
Block Modes: on page 50
.
.
Page 63