Setup (Ltb) - Siemens SITRANS LR250 Operating Instructions Manual

• RAMP steplength
a) To enable simulation select Fixed value or Ramp in the Simulation field.
b) If you select Fixed value, enter a Simulation Value.
c) If you select Ramp, enter the ramp start, end, number of steps, and
steplength.
d) Click Apply.
e) After simulation is complete, set Simulation to OFF and click Apply.

Setup (LTB)

Sensor (LTB)
7ML19985KL01 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS Page 51