Device Diagnostics (Resource Block - Resource); Alarms & Errors (Resource) - Siemens SITRANS LR250 Operating Instructions Manual

Device Diagnostics (Resource Block - RESOURCE)

Alarms & Errors (RESOURCE)
Navigate to Device Diagnostics > RESOURCE > Alarms & Errors.
Click on Block Error tab to open the dialog window to read the following:
Failures
• Input Failure
• Output Failure
• Memory Failure
• Lost Static Data
• Lost Non-Volatile Data
• Readback Check
• Device Fault State
• Block Configuration
• Link Configuration
• Other
Maintenance
• Maintenance Required
• Maintenance Demanded
Information
• Simulation Active
• Local Override
• Power Up
• Out of Service
Click on Block Alarm tab to open the dialog window to read the following:
Unacknowledged
• Unacknowledged
Alarm State
• Alarm State
Time Stamp
• Time Stamp
Subcode
• Subcode
Value
• Value
Values available on Block Alarm tab are also available for Write Alarm with one
exception: the Value parameter on the Write Alarm tab is a Discrete Value.
7ML19985KL01 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS Page 77