Quick Start; Activating Sitrans Lr250 - Siemens SITRANS LR250 Operating Instructions Manual

Quick Start

SITRANS LR250 carries out its level measurement tasks according to settings made via
parameters. The settings can be modified locally via the Local User Interface (LUI) which
consists of an LCD display and a handheld programmer.
A Quick Start Wizard provides an easy step-by-step procedure to help you configure the
device for a simple application. There are two ways to access the wizard:
• locally (See
• from a remote location (See
page 45)
For more complex setups see
complete range of parameters see

Activating SITRANS LR250

Out of the box, SITRANS LR250 will not begin measurements, and all blocks will be Out of
Service until the device has been configured via the local user interface (LUI), or a remote
configuration tool.
(If the SITRANS LR250 FF is to be used in an FF application, configure using a network
configuration tool, such as DeltaV or NI-FBUS Configurator. See
AMS Device Manager on page 45
Follow these steps to configure the device via the LUI:
• Power up the instrument
• The LCD at startup will show LANGUAGE. Edit or cancel this selection. When
complete, the device will show QUICK START.
• Complete the Quick Start Wizard (see
programmer on page 36
parameter via the LUI causes the device to begin measuring.
The Resource Block (RES) and Level Transducer Block (LTB) will move to
Automatic mode.
• AIFB 1 and AIFB 2 will remain Out of Service (as displayed on the LCD). These
blocks can only be configured and scheduled using a network configuration tool.
For more details, see System Integration in manual
Level Instruments
Note:
The last step of the Quick Start run from the LUI will place the RESOURCE block in
Automatic
mode.
Page 30 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS
Quick Start Wizard via the handheld programmer
Quick Start Wizard via AMS Device Manager
Appendix E: Application Examples on page 156
Parameter Reference (LUI) on page 96
.)
). Completing the Quick Start Wizard or writing any
(7ML19985MP01).
Quick Start Wizard via
Quick Start Wizard via the handheld
Foundation Fieldbus for
on page 36)
on
, and for the
.
7ML1998KL01