Table of Contents
Advertisement
Cisco Webex DX70 and DX80
Introduction
Video Presentation Priority
Specify how to distribute the bandwidth between the presentation channel and the main
video channel.
Requires user role: ADMIN
Default value: Equal
Value space: Equal/High/Low
Equal: The available bandwidth is shared equally between the presentation channel and
the main video channel.
High: The presentation channel is assigned a larger portion of the available bandwidth at
the expense of the main video channel.
Low: The main video channel is assigned a larger portion of the available bandwidth at
the expense of the presentation channel.
Video RememberLayout
Specify if the last selected video layout should be remembered for personal mode devices.
In personal mode, if the user selects a layout other than the default during a call or meeting,
the last selected layout is applied automatically in the next call or meeting.
Requires user role: ADMIN
Default value: False
Value space: False/True
False: The default layout is applied automatically in every call or meeting.
True: The user's last selected layout is saved and applied in the next call or meeting.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Video Selfview Default FullscreenMode
Define if the main video source (self-view) shall be shown in full screen or as a small
picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched
on (see the Video Selfview Default Mode setting). If you use the user interface to turn full
screen self-view off, it will come back as a PiP if you use the user interface to turn it on
again.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Off/Current/On
Off: Self-view will be shown as a PiP.
Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e.
if it was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the
call, it remains fullscreen after the call.
On: The self-view picture will be shown in fullscreen.
Video Selfview Default Mode
Define if the main video source (self-view) shall be displayed on screen after a call. The
position and size of the self-view window is determined by the Video Selfview Default
PIPPosition and the Video Selfview Default FullscreenMode settings respectively.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Off/Current/On
Off: Self-view is switched off when leaving a call.
Current: Self-view is left as is, i.e. if it was on during the call, it remains on after the call;
if it was off during the call, it remains off after the call.
On: Self-view is switched on when leaving a call.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
160
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
