Network [N] Ipv4 Address; Network [N] Ipv4 Assignment; Network [N] Ipv4 Gateway; Network [N] Ipv4 Subnetmask - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Network [n] IPv4 Assignment

n: 1..1
Define how the device will obtain its IPv4 address, subnet mask and gateway address.
When using DHCP for address assignment, "01" appended by the MAC address is used as
client identifier in DHCP requests.
Requires user role: ADMIN, USER
Default value: DHCP
Value space: Static/DHCP
Static: The addresses must be configured manually using the Network IPv4 Address,
Network IPv4 Gateway and Network IPv4 SubnetMask settings (static addresses).
DHCP: The device addresses are automatically assigned by the DHCP server.

Network [n] IPv4 Address

n: 1..1
Define the static IPv4 network address for the device. Applicable only when Network IPv4
Assignment is set to Static.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address.

Network [n] IPv4 Gateway

n: 1..1
Define the IPv4 network gateway address. Applicable only when the Network IPv4
Assignment is set to Static.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Network [n] IPv4 SubnetMask

n: 1..1
Define the IPv4 network subnet mask. Applicable only when the Network IPv4 Assignment
is set to Static.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address.

Network [n] IPv6 Assignment

n: 1..1
Define how the device will obtain its IPv6 address and the default gateway address.
When using DHCPv6 for address assignment, "01" appended by the MAC address is used
as client identifier in DHCP requests.
Requires user role: ADMIN, USER
Default value: Autoconf
Value space: Static/DHCPv6/Autoconf
Static: The device and gateway IP addresses must be configured manually using the
Network IPv6 Address and Network IPv6 Gateway settings. The options, for example
NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6
server. The Network IPv6 DHCPOptions setting determines which method to use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server.
See RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will be
ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See
RFC 4862 for a detailed description. The options, for example NTP and DNS server
addresses, must either be set manually or obtained from a DHCPv6 server. The Network
IPv6 DHCPOptions setting determines which method to use.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
106
Administrator Guide
Device settings Device settings Appendices