Video Presentation Defaultpipposition; Video Presentation Defaultsource; Video Presentation Priority; Video Selfview Default Fullscreenmode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Video Presentation DefaultPIPPosition

Define the position on screen of the presentation picture-in-picture (PiP). The setting only
takes effect when the presentation is explicitly minimized to a PiP, for example using the
user interface. The setting takes effect from the next call onwards; if changed during a call,
it will have no effect on the current call.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft: The presentation PiP will appear in the upper left corner of the screen.
UpperCenter: The presentation PiP will appear in the upper center position.
UpperRight: The presentation PiP will appear in the upper right corner of the screen.
CenterLeft: The presentation PiP will appear in the center left position.
CenterRight: The presentation PiP will appear in the center right position.
LowerLeft: The presentation PiP will appear in the lower left corner of the screen.
LowerRight: The presentation PiP will appear in the lower right corner of the screen.

Video Presentation DefaultSource

Define which video input source to use as a default presentation source. This setting may
be used by the API and third-party user interfaces. It is not relevant when using the user
interfaces provided by Cisco.
Requires user role: ADMIN, USER
Default value: 2
Value space: 2
The video input source to use as default presentation source.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance

Video Presentation Priority

Determine how to distribute the bandwidth between the presentation channel and the main
video channel.
Requires user role: ADMIN
Default value: Equal
Value space: Equal/High/Low
Equal: The available bandwidth is shared equally between the presentation channel and
the main video channel.
High: The presentation channel is assigned a larger portion of the available bandwidth at
the expense of the main video channel.
Low: The main video channel is assigned a larger portion of the available bandwidth at
the expense of the presentation channel.

Video Selfview Default FullscreenMode

Define if the main video source (self-view) shall be shown in full screen or as a small
picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched
on (see the Video Selfview Default Mode setting).
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Off/Current/On
Off: Self-view will be shown as a PiP.
Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e.
if it was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the
call, it remains fullscreen after the call.
On: The self-view picture will be shown in fullscreen.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
174
Administrator Guide
Device settings Device settings Appendices