Control A Far End Camera - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Control a far end camera

Sign in to the web interface and navigate to
Prerequisites
While in a call, you can control the remote participant's camera
(far end) provided that:
• The Conference > FarEndControl > Mode
On on the far end device.
• The far end camera has pan, tilt or zoom functionality. Only
the relevant controls will appear.
• Speaker tracking is not switched On on the far end camera.
• The local device has the Remote Monitoring option.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals
Call Control.
setting is switched
Control the remote participant's camera
1. Click the camera icon to open the remote
camera control window.
2. Use the left and right arrows to pan the
camera; the up and down arrows to tilt it; and
+ and - to zoom in and out.
If you are not allowed to control the far end
camera, the controls will not appear in the
image.
If the call is encrypted, the far end snapshot
behind the controls are not displayed.
Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
172
Administrator Guide
Device settings Appendices Appendices