Cucm Provisioning Of Custom Elements - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

CUCM provisioning of custom elements

A backup file, as described in the ► Backup and restore
configurations and custom elements chapter, can be used as a
customization template for multiple devices.
The customization template (backup file) may be hosted on either:
• the CUCM TFTP file service, or
• a custom web server that can be reached by the devices on
HTTP or HTTPS.
When a device get information from CUCM (Cisco Unified
Communications Manager) about the name and location of
a customization template, the device will contact the server,
download the file, and restore the custom elements.
Configurations will not be restored on the device, even
if they are part of the backup file that you use as a
customization template.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals
Upload a customization template to the TFTP file
server
1. Sign in to Cisco Unified OS Administration.
2. Navigate to
3. Click Upload
customization template in the input field.
4. Click Upload
Add customization provisioning information for each
device
1. Sign in to Cisco Unified CM Administration.
2. Navigate to
3. Fill in the Customization Provisioning fields in the product
specific configuration section of the relevant devices:
• Customization File: The customization template file name
(for example: backup.zip)
• Customization Hash Type: SHA512
• Cutomization Hash: The SHA512 checksum for the
customization template.
If these fields are not present, you must install a newer Device
Package on CUCM.
4. Click Save
devices.
If not using the TFTP Service, you must enter the complete URI for the
*
customization template:
For example:
• http://host:6970/backup.zip, or
• https://host:6971/backup.zip
Maintenance Maintenance
Software Upgrades > TFTP File Management.
File. Enter the name and path of the
File.
Device > Phone.
*
and Apply Config to push the configuration to the
<hostname>:<portnumber>/<path-and-filename>
70
Administrator Guide
Device settings
SHA512 checksum
Tip! You can find the SHA512 checksum
of a file by restoring it to a device using
its web interface.
1. Sign in to the web interface and
navigate to Maintenance > Backup
and Restore.
2. Choose the Restore backup
3. Click Browse... and find the file you
want to calculate the checksum for.
Then you can see the SHA512
checksum at the bottom of the page.
CUCM documentation
► https://www.cisco.com/c/en/us/
support/unified-communications/unified-
communications-manager-callmanager/
tsd-products-support-series-home.html
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Appendices
tab.