Xstatus Video Pip Activespeaker Position; Xstatus Video Pip Presentation Position; Xstatus Video Selfview Fullscreenmode; Xstatus Video Selfview Onmonitorrole - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus Video Selfview FullscreenMode

Shows whether selfview is set on full screen mode or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Video Selfview FullscreenMode
*s Video Selfview FullscreenMode: Off
** end

xStatus Video Selfview PIPPosition

Shows the position of the selfview image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video Selfview PIPPosition
*s Video Selfview PIPPosition: LowerRight
** end

xStatus Video Selfview OnMonitorRole

Identifies which monitor(s) contains the selfview, if present.
Value space of the result returned:
<First/Second/Third/Fourth>
Example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end

xStatus Video PIP ActiveSpeaker Position

Shows the position of the active speaker's image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP ActiveSpeaker Position
*s Video PIP ActiveSpeaker Position: UpperCenter
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration

xStatus Video PIP Presentation Position

176
xCommand
Shows the position of the presentation image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP Presentation Position
*s Video PIP Presentation Position: CenterLeft
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.