Table of Contents
Advertisement
Cisco Webex DX70 and DX80
Introduction
Video settings
Video ActiveSpeaker DefaultPIPPosition
Define the position on screen of the active speaker picture-in-picture (PiP). The setting only
takes effect when using a video layout where the active speaker is a PiP, i.e. the Overlay
layout, or possibly a Custom layout (refer to the Video DefaultLayoutFamily Local setting).
The setting takes effect from the next call onwards; if changed during a call, it will have no
effect on the current call.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the active speaker PiP will be kept unchanged when leaving a
call.
UpperLeft: The active speaker PiP will appear in the upper left corner of the screen.
UpperCenter: The active speaker PiP will appear in the upper center position.
UpperRight: The active speaker PiP will appear in the upper right corner of the screen.
CenterLeft: The active speaker PiP will appear in the center left position.
CentreRight: The active speaker PiP will appear in the center right position.
LowerLeft: The active speaker PiP will appear in the lower left corner of the screen.
LowerRight: The active speaker PiP will appear in the lower right corner of the screen.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Video DefaultLayoutFamily Local
Select which video layout family to use locally.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Equal/Overlay/Prominent/Single
Auto: The default layout family, as given in the layout database provided by the device,
will be used as the local layout.
Equal: The Equal layout family will be used as the local layout. All videos have equal size,
as long as there is space enough on the screen.
Prominent: The Prominent layout family will be used as the local layout. The active
speaker, or the presentation if present, will be a large picture, while the other participants
will be small pictures. Transitions between active speakers are voice switched.
Overlay: The Overlay layout family will be used as the local layout. The active speaker,
or the presentation if present, will be shown in full screen, while the other participants
will be small pictures-in-picture (PiP). Transitions between active speakers are voice
switched.
Single: The active speaker, or the presentation if present, will be shown in full screen.
The other participants are not shown. Transitions between active speakers are voice
switched.
Video DefaultMainSource
Define the default input source for main video in calls. The main video is played on this
source when you switch on or restart the video conferencing device. Use the Video Input
SetMainVideoSource command to change to another source while the device is running.
Requires user role: ADMIN, USER
Default value: 1
Value space: 1
The default source for main video.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
155
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
