Peripherals Settings; Peripherals Inputdevice Mode; Peripherals Profile Controlsystems - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Peripherals settings

Peripherals InputDevice Mode

Define whether or not to allow the use of a third-party input device, such as a USB
keyboard or a wireless remote control with a USB dongle. The input device must advertise
itself as a USB keyboard. You must define and implement the actions to be taken as
response to key clicks yourself.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: A third-party USB input device is not allowed.
On: A third-party USB input device can be used to control certain functions on the video
conferencing device.

Peripherals Profile ControlSystems

Define if a third-party control system, for example Crestron or AMX, is expected to
be connected to the video conferencing device. This information is used by the video
conferencing device's diagnostics service. If the number of connected control systems
does not match this setting, the diagnostics service will report it as an inconsistency. Note
that only one third-party control system is supported.
If set to 1, the control system must send heart beats to the video conferencing device using
xCommand Peripherals Pair and HeartBeat commands. Failing to do so will cause the video
conferenceing device to show a warning that it has lost connectivity to the control system.
Requires user role: ADMIN, INTEGRATOR
Default value: NotSet
Value space: 1/NotSet
1: One third-party control system should be connected to the device.
NotSet: No check for a third-party control system is performed.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
120
Administrator Guide
Device settings Device settings Appendices