Networkservices Http Proxy Mode; Networkservices Http Proxy Pacurl; Networkservices Http Proxy Password; Networkservices Http Proxy Url - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

NetworkServices HTTP Proxy Password

This is the password part of the credentials for authentication towards the HTTP proxy.
Requires that the NetworkServices HTTP Proxy Mode is set to Manual.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
The authentication password.

NetworkServices HTTP Proxy Mode

You can configure to use a proxy server for HTTP, HTTPS, and WebSocket traffic. The
HTTP proxy can be set up manually, it can be auto-configured (PACUrl), fully automated
(WPAD), or it can be turned off.
If NetworkServices HTTP Proxy Mode is not turned Off, you can further specify which
services shall use the proxy in the HttpClient UseHttpProxy, HttpFeedback UseHttpProxy,
and WebEngine UseHttpProxy settings.
Communication with the Cisco Webex cloud will always go via the proxy if NetworkServices
HTTP Proxy Mode is not turned Off.
Regardless of the Proxy Mode, the device will never communicate with CUCM, MRA
(CUCM via Expressway), or TMS via proxy.
Requires user role: ADMIN, USER
Default value: Off
Value space: Manual/Off/PACUrl/WPAD
Manual: Enter the address of the proxy server in the NetworkServices HTTP Proxy
URL setting. Optionally, also add the HTTP proxy login name and password in the
NetworkServices HTTP Proxy LoginName/Password settings.
Off: The HTTP proxy mode is turned off.
PACUrl: The HTTP proxy is auto-configured. You must enter the URL for the PAC (Proxy
Auto Configuration) script in the NetworkServices HTTP Proxy PACUrl setting.
WPAD: With WPAD (Web Proxy Auto Discovery) the HTTP proxy is fully automated and
auto-configured.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

NetworkServices HTTP Proxy Url

Set the URL of the HTTP proxy server. Requires that the NetworkServices HTTP Proxy
Mode is set to Manual.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0..255)
The URL of the HTTP proxy server.

NetworkServices HTTP Proxy PACUrl

Set the URL of the PAC (Proxy Auto Configuration) script. Requires that the
NetworkServices HTTP Proxy Mode is set to PACUrl.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0..255)
The URL of the PAC (Proxy Auto Configuration) script.

NetworkServices HTTPS OCSP Mode

Define the support for OCSP (Online Certificate Status Protocol) responder services. The
OCSP feature allows users to enable OCSP instead of certificate revocation lists (CRLs) to
check the certificate status.
For any outgoing HTTPS connection, the OCSP responder is queried of the status. If the
corresponding certificate has been revoked, then the HTTPS connection will not be used.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Disable OCSP support.
On: Enable OCSP support.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
113
Administrator Guide
Device settings Device settings Appendices