Cisco Webex DX70 Administrator's Manual page 8

Cisco Webex DX70 and DX80

Introduction Introduction
New features and improvements in CE9.13
New products
• Cisco Webex Room Panorama
• Cisco Webex Room 70 Panorama
Support for Cisco Webex Control Hub
Configuration Management
(All Products)
Cisco Webex Control Hub has been extended to
allow more control over devices that are registered on
premises and linked to Webex Edge for Devices. The new
configuration management feature, disabled by default,
will allow write-access to many device configurations.
This can be enabled through Control Hub.
Easy-join Webex Personal Meeting Rooms
(All Products)
Devices linked to Webex Edge for Devices can now
search directly for users in the Webex organization. A
button to join their Personal Meeting Room (PMR) will be
displayed in the search result next to the user's name.
Real-time media metrics when joining Webex
meetings
(All Products)
Devices linked to Webex Edge for Devices will be visible
in the media troubleshooting section in Control Hub in the
same way fully Webex registered devices are today. This
will make it easier to troubleshoot media quality issues.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals
In-call touch forwarding
Touch forwarding has been enabled for use while in-call
and can be activated and deactivated using a floating
toolbar.
Support for virtual backgrounds
You can upload your own virtual backgrounds. Images are
uploaded via the web interface. You can then select from
one of the images via the GUI.
You can also use the content from an input device, such
as a computer, as a virtual background.
Far End Cameral Control when dialing into
CMS Meetings
(All Products)
When you dial into a CMS meeting you can control the
camera of the active speaker. Just open the participant
list to find the button for "Remote Camera" control.
Note: If the active speaker is frequently changing from
person to person, it may be challenging to control the
camera of the intended participant. You cannot manually
select a specific participant for the FECC; it's always the
current active speaker.
Custom text to video stream
(Codec Plus, Codec Pro, Room 70 G2, Room Kit, Room Kit Mini,
Room 55 Dual, Room 70)
You can add time, date, and/or a custom text string to a
xCommand Video Graphics Text Display
video stream (
You can add this text to the main video stream, the
presentation stream, or to the local video output.
Maintenance
(Boards)
(Desk Pro)
).
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
8
Administrator Guide
Device settings Appendices